alguien sabe q problemas tenia la version 0.27a de la MSNS-E ???

[pablo3147]

che nos econtramos con una version 0.27a de la mega, grabada en una lieftuning
la cuestion es q esta andando con megatune, pero nose q onda esa version es mas vieja q la mierda
y no encuentro cuales eran los dramas

[Molak]

Re: alguien sabe q problemas tenia la version 0.27a de la MSNS-E ???

changelog de la 0.27a a la 0.29y4

* 027a1 Fixed a false config error in dual dizzy mode
* 027b Prevent dual dizzy if not in wheel decoder. Fix? for low speed TFI
* 027c Found bug in coil selection on 5cyl COP. Make 2nd trigger high/low active
* 027d Added low speed dwell for channels E & F
* 027e Idle advance and staging changes - KC
* still to add the RX8 code Ken has written and re-arrange flash_table0 for more ram
* 028a Rearrange and shrink flash tables to create more RAM. This required moving lots and
* lots of config data and there could easily be breakage
* 028b 2nd trigger and missing tooth would not have worked, tooth count still reset to zero
* 028c 2nd trigger + missing, now specify 720deg worth of teeth. i.e. 60-2 = 120 tooth
* Tested with ms2wheelsim.
* 028d KG idle code added
* page selection fixup and a few tweaks - JSM
* 029a Idle tweak KG. Staging no looping - JSM
* Included PR's decel mode AE changes and MAF stuff (026h2-> 026h3)
* 029b Staging. KC. One line idle change KG
* Get tooth and trigger loggers working right again (028 broke it)
* Re-arranged 2nd trigger bits in 0.1ms. Did I get it right this time? JSM
* 029c did not exist, but "029c" ini file exists
* 029d Fixed warmup >255% bug
* Merged ksp's Boost Control bits from 024s9bc (report bcDC%)
* Pambient for 300/400kpa sensors set to more reasonable, but hardcoded, value
* 029e Removed ability to turn off hires dwell. Set "running" as soon as we get IRQ
* Tweaks to wheeldecoder to "help" starting sync
* 029f Pambient for boost control is a flash var
* 029g Made wheel decoder use hardcoded WHEELINIT holdoff value again as pre 029e
* 029h Comment out line for KeithG idle. Add debug pages $F2,$F3 to read back RAM
* see mem_map.txt
* Change TX logic to enable 256 bytes to be returned
* Check Pambient is non zero else default to 100T
* 029h5 Bug fix to RPM based AE stuff - PR
* 029i Make 60-2 wheel decoder use *2 instead of *2.5 for comparison
* Bumped up format version because RPM-AE bytes were in wrong order
* 029j 026h+ had bug that caused reset when loading in MSQ.
* 029j1 Bug fix to Decel mode and made Decel timer same as Accel timer - PR
* 029k KeithG change to idle (uncomment a few lines)
* Make wheel decoder for "-2" use *1.5 like "-1"
* Moved 300kpa,400kpa map sensor settings to constants page, rewrote code
* that used them and introduced baro300, baro400 include files.
* Make default 024s9 style wheel decoder, changed default baro limits tighter
* Remove 029j1 code as it broke GammaE on startup, not sure why yet.
* 029l Put 029j1 code back in with two line fix from PhilR. 025 decoder default.
* 029m CLT/rpm air density stuff had serious bugs. Changed multiply.
* Real problem was table size was incorrectly defined so tablelookup fell off the end.
* Changed default data to something that seems more reasonable. (JSM)
* 029n Tweaks to baro corr. Confirmed 2 equal sensors required for realtime.
* 029n2,3,4 ini file changes only
* 029o Moved ego step count select to page1 so it can appear on right dialogue
* False trigger disabling option re-added (for use with trigger logger)
* 029p Always use 024s9 style decoder during cranking
* 029q Bumped up code version so that format and version match for release. No real change.
* 029r Undid one of 029e changes as it made wheel sync a lot worse.
* wheel sync was fine (for me) in 027 series codes. Probably 029e broke it.
* 029s Config errors >9 weren't working (was #10 instead of #10T)
* Added error check for LED17 + FIDLE configured
* 029t WUE/ASE were broken
* Removed VEx_LOOKUP subroutines to try to save 2bytes of stack
* 029u Found a bug that was causing spikes in many parameters (been there for ages)
* 029v Made tacho output 50% duty
* 029w Added an extra pulh for rotary trailing to SPARKTIME... stops stack overflow
** 029x portc bit7 is set if config_error
** 029x1 Gobble data if write to invalid page. Should reduce chance of corruption if
** W command executed without first setting page.
** 029x2 Make sure we read SCDR
* 029y1 MegaMeet special. Add spark hardware latency
* 029y2 Include 029x mods in 029y code
* 029y3 2nd trigger Rising and Falling option for LS1
* 029y4 Re-write of 3bar and 4bar map code so that same kPa gives same PW
* regardless of sensor type.

[pablo3147]

Re: alguien sabe q problemas tenia la version 0.27a de la MSNS-E ???

gracias, ayer busque pero no la encontraba, creo q era el cansancio

[Molak]

Re: alguien sabe q problemas tenia la version 0.27a de la MSNS-E ???

no esta en internet .. esta en una archivo en el megatune ...