Unos videillos...

[Urbandrag]

Turbo bike has 3-stages of boost...
1st gear is 0-4 PSI of boost (it creeps to 4+PSI) = 155ish HP.
2nd gear has 8-9PSI = 190 HP.
3rd gear-up has 15PSI = 230 HP.

Things to watch for...
The boost rises as I shift...(also varies when modulating throttle to keep from FLIPPING OVER!!!)...
The Speedometer stops rising...then JUMPS to 130+MPH when the front wheel "lands"

http://www.stockmildtowild.info/Kevi...xt01_500KB.mpg


This is Dean's ZRX1100 turbo (1080cc)...
This bike has produced 344HP!!! and 194FtLb torq on the SM2W dyno after tuning with approx. 30PSI boost...
As it turns out...the motor AND turbo were actually "hurt" when this run and video were made
We found that the Valve Seats had moved in the head and that the turbo was ailing also...
Dean has run 8.40s and 8.50s at 176+MPH...

There is a "short" version and smaller file of the vid below for dial-up folks that is only over there...

http://stockmildtowild.info/Kevins_V...text_225KB.mpg


My other OnBoard run at the last T&T of 2005...
This was against Dana Smith's ZX10R that we installed Dry-NO2 on...
His bike makes 200HP "with the button pushed"...
Very good rider also

http://stockmildtowild.info/Kevins_V...xt02_225KB.mpg