Announcement

Collapse
No announcement yet.

Chevrolet camaro z/28 69" the black wolf!!!!!!

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chevrolet camaro z/28 69" the black wolf!!!!!!

























    Motor & Drivetrain
    Though normally associated with BMW products, Dinan Engineering proves that an internal combustion engine after all, is just that, regardless of pedigree. Dusty Renteria did the honors with a Scat forged crankshaft and Scat connecting rods pinned to Mahle forgings (10.3:1 compression ratio) and accompanied by Mahle ring packs. The pocket computer tells us that a 4.155-inch bore and 3.80-inch stroke yield 423 cubic inches. How's that for a stick in the eye, chumps? For that second poke in the other eye, how about a raspy solid flat-tappet to tickle the valves? The Comp cam is a 4/7 firing order swap item but all other info is proprietary. Dusty wrapped up the bottom end with a Moroso 6-quart sump attended by a Moroso oil pump and pickup. On the top tier, he used AFR 210 Competition Package cylinder heads featuring a 23-degree valve angle, 2.08/1.60-inch valves, 65cc combustion chambers, and 210cc intake ports. Valvesprings, retainers, and locks are included. He sourced the pushrods and 1.6:1 rockers from Comp and went to an Edelbrock Super Victor (CNC-prepped plenum chamber, port exits, divider walls, and runner roofs) single-plane manifold spritzed by an 850-cfm Demon. An MSD setup throws fireballs at 39 degrees BTDC and the trash resultant is sucked out by Lemons 17/8-inch primaries and on through a stainless steel exhaust system with 3-inch diameter pipes. Dusty used ARP fasteners throughout the assembly, securing the Performance Rod & Custom radiator and the Vintage Air Front Runner accessory drive. Output at the ground is 519 hp at 6,900 rpm and 494 lb-ft of torque at 4,600 rpm. A nice, stout atmospheric engine with a superlative torque curve, just like in the old days. The produce is transferred by a Centerforce DFX single-disc clutch assembly to a Tremec TKO 600 equipped with a 0.62:1 top gear. The rear universal joint on the custom driveshaft connects to a 3.89:1 ring-and-pinion riding a Tru-Trac limited-slip differential in a narrowed 9-inch housing.

    Body & Paint
    A short story but many hours long. Rich Bermea at Road Touring Customs affixed the shell with all-new sheetmetal, a trick Marquez Design front bumper, front valance panel, and trunk spoiler. He welded all the seams and smoothed them out and relieved the front and rear fenders of their side markers. Bermea did the body prep, rubbed the car, and shot the mile-deep PPG Black.

    Chassis Prep
    Similar to an in-house Detroit Speed project; Bermea accumulated mini-tubs, rollbar, subframe connectors, a subframe complete with tubular control arms, 550 lb/in front springs, coilover shock absorbers, and a companion splined anti-sway bar. Power-assisted rack steering and C6 Corvette steering knuckles are included in this package. The rear station got 250 lb/in coils and Koni adjustables. Bermea situated the 9-inch axle with a QUADRALink four-bar suspension and finished it off with the corresponding anti-sway bar.

    Wheels And Brakes
    When you got 14-inch rotors and red six-piston calipers at every corner, you want to showcase them with the appropriate hoops. Baer 6S systems are obscured slightly by airy three-piece Fikse Profil 5S forgings (18x10, 18x12) equipped with BFG g-Force T/A KDW 2 rubber, size 275/35 and 335/30.

    Interior
    Since you can't see yourself rolling down the highway, you go for the next best option: a sectioned interior with the best materials and accoutrements available. Bermea laid in the American Autowire harness along with the DSE dash insert stocked with Auto Meter Ultra Lite II gauges and the Vintage Air HVAC system. Then he set the stage for the drama of black. Custom Classics in San Martin, California, put those cool Cobra seats in German leather in harmony with the Marquez Design door panels and the rear passenger perch. Mercedes-Benz carpeting flows throughout. Eric grips the MOMO wheel and flicks the Hurst shifter, all the while anticipating the smooth rumble of the 3,600-watt Alpine deck, Xponent amps, and MB Quart speakers. And all that, friends, was what really happened up in Gilroy.


  • #2
    Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

    lo estuve mirando un rato a ver que encontraba para criticarle y la verdad que nada!!

    sencillamente per fec to

    Comment


    • #3
      Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

      Que linda la tapa de vauvulas la puta madreee!!!

      Comment


      • #4
        Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

        Buen auto, no me terminan de cerrar las llantas, son muy parecidas a las OZ F1, le pondria otra cosa, no es que le queden mal, pero utilizaria algo mas rebuscado para ese auto.

        Comment


        • #5
          Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

          Originally posted by ENFIERRADOS View Post
          Buen auto, no me terminan de cerrar las llantas, son muy parecidas a las OZ F1, le pondria otra cosa, no es que le queden mal, pero utilizaria algo mas rebuscado para ese auto.


          Opino igual, hubiera puesto algo como unas Torq Thrust II o Smoothie II

          Comment


          • #6
            Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

            esto si que esta perfecto...muy bueno...519 hp at 6,900 rpm and 494 lb-ft of torque at 4,600 rpm ...con estio no se necesita mas creo...

            Comment


            • #7
              Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

              tiene un bardo con el marcador de combustible, no le pusieron el flotante

              Comment


              • #8
                Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

                Que BELLEZA!!!

                Comment


                • #9
                  Respuesta: Chevrolet camaro z/28 69" the black wolf!!!!!!

                  para mi eligieron las llantas esas por que son muy parecidas a las del vette nuevo

                  Comment

                  Working...
                  X